Endodontic Oven
Endodontic Oven
SS White® CORE™ Endodontic Oven
The Oven is designed for heating carrier-based obturators such as the SS White® V-Fill™2 Obturators.
Easy-to-operate flat surface controls allow easy adjustments between
the two temperature settings. Indicator light and audible sound signal when the oven reaches the pre-selected heat setting. Once the desired temperature is reached, the oven maintains the obturator(s) at the ideal heat setting until ready for use.
 |
 |
|
1. Place the obturator in a 5.25% sodium hyperchlorite solution for one minute, then rinse with 70% alcohol and allow carrier to dry thoroughly before use. |
2. Dry the canal and apply a thin layer of sealer.
|
 |
|
|
3. Set the stopper to the working length (or use the calibration rings).
|
4. Oven can be used with the same heating setting as your current oven. Set the oven to the corresponding ISO size. |
 |
 |
|
5. Insert the obturator into the oven and start the heating cycle. |
6. Remove the obturator when the oven beeps. |
 |
 |
|
7. Immediately place the obturator smoothly in the canal to the working length. |
8. Cut the obturator at orifice level.
|
Click image to view catalog